Have to decided to join the 10 speed wide range revolution, but found even with a long b-tension screw that you can't quite get a nice derailleur adjustment, or have found that you now get chain skip on the high gears? If so then GoatLink is for you! GoatLink removes the need for a longer b-tension screw by slightly repositioning the rear derailleur to a more optimal position, this also increases the chain wrap on the high gears (11t & 13t) which prevents chain skip/jump. The Lindarets/Wolf Tooth GoatLink is simply the fastest route to improved wear and long-term shifting performance on wide-range 1x10 drivetrains using the Shimano Shadow+ Rear derailleurs. The GoatLink re-positions 10 speed Shimano Shadow+ Rear derailleurs to the optimal location when using a Wide Range Cassette or Range Extender Sprocket. The GoatLink works with any 11-40t or 11-42t 10 speed wide range cassette or expander sprocket. Features: You will NEVER need a longer b-screw with the GoatLink Stainless Steel mounting hardware included Material 7075-T6 Manufactured in Minnesota, USA Weight: 19g Improvements with the GoatLink:* Chain Wrap at 11t (effects cassette life): 40t: Improved by 69% 42t: Improved by 53% Free Chain at 11t (effects shifting precision): 40t: Improved by 25% 42t: Improved by 19% *Due to variations in derailleur hanger geometry, chainstay length, chainring size, B-screw adjustment, and suspension configuration, individual results will vary slightly.
13 avaliações para Wolf Tooth GoatLink for Shimano only size
Produtos Relacionados
Kasteco
4 Pack 304 Stainless Steel Universal Quick Release Bike Wheel Skewer Springs
R$154,90
Frete Grátis
Luda (comprador verificado) –
Wolf Tooth did it again!
This GoatLink is the perfect complement to my Shimano XT Shadow long cage rear deurailler after I added a 42T extended range cog. Shifting has never been smoother and I have this little difference-maker to thank! Wolf Tooth products are amazing and stand the test of time!
James Earl Carter (comprador verificado) –
Exactly the right tool for the job of running a 11-42 cassette on a new shimano 10 speed deraileur.
I wanted to upgrade my 9 speed shimano to a 10 speed with a 11-42 cassette. This device is exactly the perfect tool for it. You can’t fit larger than a 34 cog on a stock shimano. Well, technically you might be able to get a 40 on there if you extend the b-screw a bit but then you have an overtensioned deraileur running at a funny angle and wearing your cogs. This is the right solution. No need to crank the b-screw it. This item works with modern Shimano derailures that have a removable linkage from the deraileur to the dropout mount. I note that my ten year old Shimano 9 speed derailure did not have this removable linkage and so would not have worked for this, but the new 10 speed shimano I bough for this project did have this removable link. You just screw the stock link off and screw this one on. that’s all there is to it.By the way:I debated whether to use a medium cage or a long cage and in the end decided on a long cage because the medium cage is just a bit too close to it’s maximum tolerance for an 11-42, and thus requires getting the chain size just right.Here’s the specs from 2016 shimano data sheet for mountain bike deraileurs.SS – Short Cage Road Double – Maximum Cassette Cog is 27 and Total Capacity is 29GS – Medium Cage MTB/Road Triple – Maximum Cassette Cog is 34(MTB)/27(Road) and Total Capacity is 33(MTB)/37(Road)SGS – Long MTB – Maximum Cassette Cog is 34 and Total Capacity is 45capacity is the sum of the differences of the smallest and largest cogs front and back. You can still run with a system exceeding the capacity but it will lock up if you cross shift it. I used to to that to get more chain tension but stopped because it’s just to easy to crossshift it by accident and the new shadow deraileurs provide extra tension.
odin (comprador verificado) –
Great product, does what’s needed.
I converted my bike to a 1x and a 10 spd 11-42 cassette and while I could of adjusted the b-screw slightly I opted (at time of purchase) to also get the Goatlink just in-case, which is only slightly longer then the stock Shimano Direct Mount that was on my derailleur (Shimano XT Shadow, Long Cage) but the good news is I didn’t even need to touch the B-Screw or anything else, basically just plug n play, first try all gears shifted fine and no adjustments needed, plus I assume chain wrap is better with this then the b-screw method.Pros-Made in USA-Aluminum (unsure if its 6061 or 7071), – their website says its 7071, but the product info shows 6061——Better chain-wrap-Easy install.Neutral-The amazon picture shows a model with a silver pin going through it, the one I received has a metal tab instead (which is shown on the WT website)-The Wolf-tooth website advertises it as 7071-T6 aluminum, but product info cutout says CNC 6061, for this price I feel it should be the best material (7071), what is correct?, I assume they did a revision at some point removed the metal pin and downgrade the metal for cost savings.Cons-Price, as with most bike components they are overpriced, and also being made in the USA comes at a cost.-Cannot get a hold of wolf-tooth support, I tried emailing them a question (about pin and metal type, and if it was possible this would work with a 11-46 10 spd cassette) but I was just ignored. 🙁
Alejandro Lucía (comprador verificado) –
Muy buen producto.
Con este extensor he conseguido que mi cambio xt albergue un cassette 11/46 sin ningún problema, no me ha hecho falta cambiar el tornillo de tensado. El producto funciona a la perfección y es muy ligero, aunque un poco caro.
Marco Mantero (comprador verificado) –
Perfetto fa il suo lavoro
con la corona da 42 il cambio a 10 velocità aveva qualche difficoltà, con il goatlink invece funziona perfettamente, presumo che si possano montare corone ancor più grandi
Gordon Brodie (comprador verificado) –
11-46T 1×10 setup no problem
Bought this to run an 11-46t sunrace cassette on my 1×10 setup.Works a treat, shifting is great, wheel removal a doddle and plenty adjustment on the limit screws.A great no hassle product.
RickRandom (comprador verificado) –
Macht was es soll!
Verbaut mit einem Shimano Zee (FR) Schaltwerk um eine 11-42 Sunrace Kassette zu schalten. Dauertest steht noch aus.
Doc1 (comprador verificado) –
Perfect for going 10sp 40T
I was running 32t x 11-36 Shimano XT / SLX setup. I swapped out the XT 11-36 cassette with a Sunrace 11-40, added the Goatlink on the SLX derailleur, went to a 36t up front. This setup has around 1600 miles on it now. With typical cleaning it’s worked very well all summer.
seb (comprador verificado) –
très cher pour un simple bout d’aluminium..
Fonctionne parfaitement avec mon dérailleur XT qui n’avait pas assez de dégagement pour ma cassette 11/42.Par contre plus de 30 euros avec les frais de port, ça fait très cher le simple bout d’aluminium, et proportionnellement au prix du dérailleur lui même (70euros) c’est tout simplement carrément abusé !!!
Kenneth Landon (comprador verificado) –
works perfect for 1×10 shimano deore medium cage and 42t
if your derailleur is to close to rear sprocket or have to adjust the b screw all the way in this will put the derailleur at at the position you need and return the b screw to normal position .
Mason Fletcher (comprador verificado) –
🙂
I somehow managed to bend and break the stock one that came on my bike. Tracked this little thing down, did the exact same thing to the bike and this head up. Plus a bunch of told people told me I needed a whole new derailleur hanger and I thought they were dumb. And they were. So this is a great product!
Mark D Nakvasil (comprador verificado) –
Awesome
Wolf Tooth Components all the way. Flawless machine work, very strong and made in the United States
Ebolamonkey (comprador verificado) –
The GOAT!!!
Without this link, I would have had to buy this part from Shimano: Y5ZH98010 which is a Rear Derailleur Bracket Axle Unit. It’s cheaper but usually out of stock everywhere and with shipping costs more than this.This solved my problem for mounting a Direct Mount Shimano M6000-SGS derailleur onto my Standard Mount frame!