4-digit resettable combination; no mounting bracket included. Weight: 5.92 oz (167.8 g). Cable diameter: 0.4 inch (10 mm) with PVC coating. Cable length: 32 inches (80 cm). Materials: braided steel cable with PVC coating; zinc alloy lock body with ABS combination dials. How to Set or Reset the Combination: 1. Align the factory-set combination 0000, or the current combination, with the indicator line and remove the lock bolt completely. 2. Turn the reset knob marked "SET" 90 degrees clockwise to the reset position. 3. Turn the combination dials to the desired code, centering each number on the indicator line. 4. Keep all four combination dials stationary while turning the reset knob 90 degrees counterclockwise fully back to its original operating position. 5. Before securing an item, complete at least three full locking and unlocking test cycles with the new combination. 6. Record or photograph the new combination and store it safely. Locking and Support: To lock: Align the correct combination, insert the lock bolt straight and fully into the lock body, then turn the combination dials away from the correct code. Gently pull the lock bolt to confirm that it remains secured. If you have questions about setup or operation, or if the lock does not operate reliably, stop using it and contact us through your order. Package Contents and Combination Reminder: Package Contents: 1 x self-coiling cable lock and printed product instructions. Combination Reminder: You can set your own combination. After setting or changing it, record or photograph it and store it safely. To change the combination again, the lock must be open and the current combination must be correctly aligned.
